Imonex The legend in coin flow. 1-800-446-2719
979-885-3200
Home Contact Us Technical Info
» Laundry
» Car Wash
» Amusements
» Vending
» Pay Phone
» Testimonials

» Coin vs Debit Card
» E Series

Agreement

Login
Electronic/Multiplier Board (EM board) Series
R7 Series with an EM board (covers off DIP switches)
R7 Series with an EM board (covers off DIP switches)

Z32 Series with an EM board (covers off DIP switches)
Z32 Series with an EM board (covers off DIP switches)

A5 Series with an EM board (covers off the DIP switches)
A5 Series with an EM board (covers off the DIP switches)

V92 Series with an EM board (covers off the DIP switches)
V92 Series with an EM board (covers off the DIP switches)

Z92 Series with an EM board (covers off the DIP switches)
Z92 Series with an EM board (covers off the DIP switches)

The IMONEX® Electronic/Multiplier board (EM board) with optics is available for the IMONEX® R, Z, A, and V Series Multi-Coin Acceptors (shown: IMONEX® R7 Series Multi-Coin Acceptor)

All IMONEX® EM boards are conformal coated for protection against moist environments. IMONEX® also offers dipped EM boards, which virtually makes the acceptor water-resistant; dipped EM boards are recommended for self-serve bays in the car wash industry.

FEATURES:
  • Can be set up to totalize currency to a preset vend amount before sending a credit pulse to the machine
  • Built to withstand the unforgiving environment that can affect the performance of a coin drop
  • DIP switch programmable
  • Covers over the DIP switches to protect board from dust and lint
  • Labels on wires for easy installation
  • Overpayment option
  • Pulse length is DIP switch programmable for 10 or 150 millisecond timing
  • More than ten different settings for millisecond timing
  • Multiplier is DIP switch programmable for one or two pulses for the lower currency coin, or two to eight, or ten pulses for the higher currency coin
  • Vend amount is DIP switch programmable for up to 63 times the lower currency coin
  • Operator feedback via a bright LED for power on and pulse output indication
  • Remote mountable
  • Operates with 12-24 Volt DC or AC power
  • Lockout (optional)
  • Circuitry protected from power spikes, shorts or incorrect wiring