| |
IMONEX® E Series Multiplier Board for the IMONEX® R, V, and
Z Series Multi-Coin Acceptors (shown on the IMONEX® R Series Multi-Coin
Acceptor)
FEATURES:
- Can be set up to totalize currency to a preset vend amount before
sending a credit pulse to the machine
- DIP switch programmable
- Pulse length is DIP switch settable for 50 or 150 ms
- Multiplier is DIP switch settable for one or two pulses for
the lower currency coin, or two to eight, or ten pulses for the
higher currency coin
- Vend amount is DIP switch settable for up to 32 times the lower
currency coin; e.g., $8.00 for quarter/dollar unit
- Operator feedback via a bright LED for power on and pulse output
indication
- Mounts on the IMONEX® V, Z, and R Series acceptor
- Remote mountable
- Operates with 12-24 Volt DC or AC power
- Circuitry protected from power spikes, shorts or incorrect wiring
SPECIFICATIONS:
| Supply Voltage: |
12-24 VDC or VAC +10%, -15%, 50/60 Hz |
| Current Draw: |
25mA, 100mA Peak |
| Pulse Timing: |
50mS or 150mS, DIP switch adjustable |
Coin Signal:
|
| Solid State: |
2.5 - 30 VDC @ 1.5mA Maximum Sink
|
| Relay: |
0 - 30VDC @ 5A Max,
0 - 120 VAC @ 10A Max |
|
Operating Temperature Range:
|
- 24º to 70º Centigrade,
-10º to 158º Fahrenheit
|
Operating Humidity:
|
Non-water resistant units: 0 - 95%Non-Condensing |
Water Resistant Units:
|
Conformally coated for
100% humidity and splash
proof environment
|
|
|
E Series
